NEWS - NEWS & ANNOUNCEMENTS

NEWS

NEWS & ANNOUNCEMENTS

Stay tuned for the latest product news from EVERWIN and announcements on our next show near you.
  • All News
  • Media Reports
  • Technical Articles
  • Product Press Releases
  • Exhibitions & Events
  • YouTube
EVERWIN’s Comprehensive Lineup of Furniture Manufacturing Solutions. May 10, 2023Technical Articles

EVERWIN’s Comprehensive Lineup of Furniture Manufacturing Solutions.

When it comes to industrial furniture manufacturing, there is a complex process requiring a host of different tools and fasteners to secure many different intricate pieces together.
EVERWIN’s FN1850 18-gauge Brad Nailer May 10, 2023Product Press Releases

EVERWIN’s FN1850 18-gauge Brad Nailer

After two-years in development, five engineering pilot runs and eight-plus field test takes, the new EVERWIN FN1850 (18-gauge brad nailer) is finally ready to get into your hands.
EVERWIN 5 Main Tips for Finish Work - Going Back to the Fundamentals May 08, 2023Technical Articles

EVERWIN 5 Main Tips for Finish Work - Going Back to the Fundamentals

Using a pneumatic finish nailer can be quite daunting at first, especially when putting thin fragile moldings together without ruining them. It requires special skill and experience, if you're about to kickstart your project, let's go over 5 main tips for finish work.
Glen Simpson, EVERWIN’s New Account Manager Feb 10, 2023Media Reports

Glen Simpson, EVERWIN’s New Account Manager

EVERWIN is nailing down its promise of making sure we always support our customers actively in a solution-oriented manner. This means bringing in the manpower of Glen Simpson, an in-house product line expert with 41 years of technical support experience.
2023 Taiwan International Fastener Show Apr 14, 2023Exhibitions & Events

2023 Taiwan International Fastener Show

Are you ready for one of the biggest fastening exhibitions in the industry? EVERWIN will be exhibiting at the 2023 Taiwan International Fastener Show and we'd love to see you there!
Newer, safer, quicker.The Paller Clinch Nailing Solutions from EVERWIN PN70CL Apr 07, 2023YouTube

Newer, safer, quicker.The Paller Clinch Nailing Solutions from EVERWIN PN70CL

Looking for a quicker and safer way to do pallet repair? Say goodbye to conventional repair methods and check out EVERWIN's new PN70CL, a patented pneumatic tool that revolutionizes the way string pallets are repaired. Take a look at how it works!
25.4mm (1”) Crown Industrial Corrugated Nailer | CFN-15S Apr 06, 2023YouTube

25.4mm (1”) Crown Industrial Corrugated Nailer | CFN-15S

Shooting Senco SC2 corrugated fasteners up to 15mm (5/8”), the CFN-15S corrugated nailer is a reliable tool that features an all-metal construction with a magnesium engine and tool-free fastener length adjustment.
EVERWIN's Flagship Lineup of Industrial Pallet Nailers with the widest range in the industry Apr 06, 2023YouTube

EVERWIN's Flagship Lineup of Industrial Pallet Nailers with the widest range in the industry

With pressure for faster production and repair turnaround constantly increasing in the pallet & case industry, the need for efficient tools has never been greater. With our vast experience in tool development, EVERWIN leads the market in practical solutions for pallet & crate making operations.
EVERWIN Industrial Built 18 Gauge Tools, Mnimize Operation Downtime with Unmatched Toughness! Feb 18, 2023YouTube

EVERWIN Industrial Built 18 Gauge Tools, Mnimize Operation Downtime with Unmatched Toughness!

Don't purchase another average brad nailer without watching this comparison.
Success of 2022 STAFDA Party Dec 15, 2022Exhibitions & Events

Success of 2022 STAFDA Party

2022 is a milestone year for us here at EVERWIN as we celebrate our 10th Year Anniversary. With a bunch of EVERWIN fastening folks all under one roof with good food, drinks, and exciting games, made for a lively atmosphere.
Choosing a Finish Nailer - 16, 18, 21, 23 Which Gauge? Nov 16, 2022Technical Articles

Choosing a Finish Nailer - 16, 18, 21, 23 Which Gauge?

Gauging the Differences: Which Finish Nailer Should I Buy?
World's Lightest 90mm Framing Coil Nailer, EVERWIN's FCN90LB highlighted on FASTFIX TECH Magazine Nov 16, 2022Media Reports

World's Lightest 90mm Framing Coil Nailer, EVERWIN's FCN90LB highlighted on FASTFIX TECH Magazine

EVERWIN states its newest framing coil nailer, FCN90LB, is answering the demands of modern users – with it being light enough for decking, powerful enough for framing, as well as precise enough for siding.
2022 STAFDA Convention (San Diego, CA) Oct 20, 2022Exhibitions & Events

2022 STAFDA Convention (San Diego, CA)

EVERWIN will return to the STAFDA Convention from October 30 - November 01 of 2022 in San Diego, california.
EVERWIN's New National Sales Director of North America, Robert Pare. Oct 14, 2022Media Reports

EVERWIN's New National Sales Director of North America, Robert Pare.

Robert’s knowledge and experience will be pivotal in identifying partner opportunities, maintaining strong working relationships with current clients, and ensuring the delivery of quality solutions that meet EVERWIN’s short and long-term goals.
Classic Workhorse Framing Nailer Re-engineered by EVERWIN Oct 13, 2022YouTube

Classic Workhorse Framing Nailer Re-engineered by EVERWIN

Fast, simple, and built to last. The FSN2283AD is a classic style framing nailer.
EVERWIN's Walking Stick Accessory for Better Ergonomics and Application Efficiency Oct 13, 2022YouTube

EVERWIN's Walking Stick Accessory for Better Ergonomics and Application Efficiency

Save your lower back, no more bending over and climbing in and out of the gaylord boxes!
The Most Reliable Staplers in the Market by EVERWIN Oct 13, 2022YouTube

The Most Reliable Staplers in the Market by EVERWIN

Covering furniture, pallet, lathing, and roofing applications, the SN41 series will get any job done.
PRO Grade 21 & 23 Gauge Pinners Oct 13, 2022YouTube

PRO Grade 21 & 23 Gauge Pinners

They strike the perfect balance of power, precision and consistency along with features that rival key competitors, our EVERWIN team has delivered once again.
Most Compact Paper Tape Framing Nailer - The PTIA Award-winning Oct 13, 2022YouTube

Most Compact Paper Tape Framing Nailer - The PTIA Award-winning

Durable, powerful, and reliable, the 2020 PTIA award winning FSN3490.
Most Compact Coil Framing Nailer Ever Made Oct 13, 2022YouTube

Most Compact Coil Framing Nailer Ever Made

The FCN90B is the MOST COMPACT 90mm framing coil nailer in the world today, allowing you to work between C-C studs with ease.
Amphibious Nailer, Framing/Decking/Siding Dream Tool Oct 13, 2022YouTube

Amphibious Nailer, Framing/Decking/Siding Dream Tool

Light enough for decking, powerful enough for framing, and precise enough for siding - FCN90LB.
EVERWIN Introduces Its Industrial Crating Solutions Aug 30, 2022Technical Articles

EVERWIN Introduces Its Industrial Crating Solutions

Securing Your Goods, One Fastener at a Time.
Interview With Everwin Pneumatic (Contractor Supply Magazine) Aug 04, 2022Media Reports

Interview With Everwin Pneumatic (Contractor Supply Magazine)

The newly released PCN70CL revolutionizes wooden pallet repairs by reusing lumber
Tough as Nails: Nailing Down the Different Types, Collations and Recommendations. Jul 12, 2022Technical Articles

Tough as Nails: Nailing Down the Different Types, Collations and Recommendations.

As you might guess, nails are ancient technology going way back to the 1800s when you had to
heat square iron rods and hammer the sides to form a point.
Daniel Burgjohann named General Manager of EVERWIN North America Jun 19, 2022Media Reports

Daniel Burgjohann named General Manager of EVERWIN North America

Please join us in welcoming General Manager of North America - Daniel Burgjohann to EVERWIN! Daniel carries with him over 20 years of accomplished sales and marketing leadership, and a background across channel management, product development, finance, sourcing, and engineering
Interview With Everwin Pneumatic Jun 08, 2022Media Reports

Interview With Everwin Pneumatic

Learn what’s been cooking at EVERWIN and what to expect trending soon in the market. Interview with Easy Engineering Magazine.
EVERWIN's Full Lineup of Pallet Nailing / Repair Solutions May 30, 2022Technical Articles

EVERWIN's Full Lineup of Pallet Nailing / Repair Solutions

Tougher, Faster, and Smarter tools at their best.
Q&A with Everwin's Rudy Canlas May 24, 2022Media Reports

Q&A with Everwin's Rudy Canlas

Everwin is known for innovation and quality products. Tell us a bit about the company’s
evolution, from its humble beginnings to today’s global footprint.
EVERWIN PTIA Award Winning FSN3490 May 17, 2022Product Press Releases

EVERWIN PTIA Award Winning FSN3490

Everwin Pneumatic Corp. is proud to introduce its 2020 PTIA award-winning FSN3490, a 34°
3-1/2" (90mm) framing nailer. Its unique design stomps its dominance on the pillars of POWER, MANEUVERABILITY, and SPEED.
How a pneumatic nail gun works May 16, 2022Technical Articles

How a pneumatic nail gun works

From arm-powered hammers, tediously pounding away iron nails into wood to automatic nail driving machines.
Choosing Between a Siding Nailer or Framing Nailer Apr 28, 2022Technical Articles

Choosing Between a Siding Nailer or Framing Nailer

To get the most payoff with your nail gun it is important to know the purpose of which nailer is best suited before your purchase.
Trigger is the Key to Purchase Nail Guns Apr 25, 2022Technical Articles

Trigger is the Key to Purchase Nail Guns

The right trigger can increase productivity and safety on the job site so before you purchase a pneumatic tool consider which trigger feature benefits you the most.
4 Quick Steps to Nail Gun Safety Reminder Apr 18, 2022Technical Articles

4 Quick Steps to Nail Gun Safety Reminder

With the ability to increase productivity in your workplace and reduce workday hours, nail guns are the most useful and productive tools. However, when not handled properly they can also cause unnecessary injuries. By continually working together with our customers, we can help reduce risk of injury with users of our EVERWIN product line.
Contractor Supply Magazine on the FN1850 and the FS9040 Jun 30, 2021Media Reports

Contractor Supply Magazine on the FN1850 and the FS9040

After a two-year development, five engineering pilot runs and eightplus field test takes, the FN1850 (18-gauge brad nailer) and the FS9040 (90-series narrow crown cap stapler) are expected to roll out in Q4 of 2021.
A Comparison between Coil Framing Nailers and Stick Nailers Feb 25, 2021Technical Articles

A Comparison between Coil Framing Nailers and Stick Nailers

Which is better between a coil framing nailer and a stick nailer? This has always been a question for the ages.
4 Essential Tips to Replacing Engineered Wood Siding Feb 25, 2021Technical Articles

4 Essential Tips to Replacing Engineered Wood Siding

Siding replacement is not an easy thing to do, and that goes for everyone including professionals. During the process, it is important to make sure that the replacement work is accurate enough so that your project stays in good shape for years.
Contractor Supply Magazine on the FSN3490 May 30, 2020Product Press Releases

Contractor Supply Magazine on the FSN3490

EVERWIN’s upcoming 34-degree 3-1/2” framing nailer, the FSN3490 is set to be the most powerful nailer in its class with comparable weight (8.2 lbs) to that of other brands.
Suggested Tool Cleaning Guide May 07, 2020Media Reports

Suggested Tool Cleaning Guide

The Coronavirus has made construction site sanitation more important than ever. Clean tools and hands
are essential for your crew’s wellbeing. Routine cleaning and maintenance can also extend the tools’
lifespan, prevent unexpected downtime and reduce safety hazards.
COVID-19 Operation Update May 06, 2020Media Reports

COVID-19 Operation Update

COVID-19 Operation Update to Our Employees, Customers, Suppliers and Valued Partners
EVERWIN® Wins a 2019 Pro Tool Innovation Award Sep 30, 2019Media Reports

EVERWIN® Wins a 2019 Pro Tool Innovation Award

This month wrapped up judging for the 7th annual Pro Tool Innovation Awards and EVERWIN received an award for the SN50S5-A.
EVERWIN® MCN40 Joist Hanger Nailer Review by Pro Tool Reviews Sep 20, 2019Media Reports

EVERWIN® MCN40 Joist Hanger Nailer Review by Pro Tool Reviews

The Everwin Joist Hanger Nailer is another impressive offering from a company that keeps pushing the lower bounds of nailer size and weight.
EVERWIN® FCN90 Coil Framing Nailer Review by Pro Tool Reviews May 24, 2019Media Reports

EVERWIN® FCN90 Coil Framing Nailer Review by Pro Tool Reviews

Everwin's effort to push forward the framing nailer's power, compactness, and performance is clearly evident in the FCN90.
EVERWIN® MCN40 Joist Hanger Nailer Video Review by Nail Gun Depot May 08, 2019Media Reports

EVERWIN® MCN40 Joist Hanger Nailer Video Review by Nail Gun Depot

We're excited to announce the arrival of Everwin's MCN40 Joist Hanger Nailer, launched exclusively through Nail Gun Depot! Conceived with innovation and convenience in mind, this metal connector nailer is noticeably compact. Don't let its small size fool you - see it for yourself!
EVERWIN® Introduces Industry’s First Dedicated 90mm (3-1/2”) Pallet Coil Nailer Apr 01, 2019Product Press Releases

EVERWIN® Introduces Industry’s First Dedicated 90mm (3-1/2”) Pallet Coil Nailer

Everwin Pneumatic Corp. introduces the PN90 Industrial Coil Nail Gun, a nimble pneumatic tool with industrial-grade power.
EVERWIN® Block Innovative String Pallet Repair Solution Apr 01, 2019Product Press Releases

EVERWIN® Block Innovative String Pallet Repair Solution

Everwin Pneumatic Corp. introduces the PN70CL Industrial Clinch Nail Gun, a patented pneumatic tool that revolutionizes the way string pallets are repaired.
EVERWIN® Unveils Powerful, Compact Metal Connector Nail Gun Mar 25, 2019Product Press Releases

EVERWIN® Unveils Powerful, Compact Metal Connector Nail Gun

Everwin Pneumatic Corp. introduces the MCN40 Joist Hanger Nail Gun, a nimble pneumatic tool with industrial-grade power.
EVERWIN® FCN90L Framing Nailer Review by Tools of the Trade Dec 19, 2018Media Reports

EVERWIN® FCN90L Framing Nailer Review by Tools of the Trade

A 3 1/2-inch coil framing nailer with a light but tough magnesium housing
2018 STAFDA Convention (Phoenix, AZ) Oct 26, 2018Exhibitions & Events

2018 STAFDA Convention (Phoenix, AZ)

EVERWIN will return to the STAFDA Convention from October 28 - 30 of 2018 in Phoenix, Arizona.
EVERWIN® Wins a 2018 Pro Tool Innovation Award Sep 30, 2018Media Reports

EVERWIN® Wins a 2018 Pro Tool Innovation Award

This month wrapped up judging for the 6th annual Pro Tool Innovation Awards and EVERWIN received an award for the SCN51.
2017 STAFDA Convention (Austin, TX) Nov 13, 2017Exhibitions & Events

2017 STAFDA Convention (Austin, TX)

EVERWIN will return to the STAFDA Convention from November 12 - 13 of 2017 in Austin, Texas.
Oct 17, 2017Media Reports

"Pin Nail Parlay: Are EVERWIN Pin Nailers Worth The Gamble?", An Article by Nail Gun Depot

Most brand-loyal woodworkers will no doubt stick to their guns, but for those who need a well-built, budget-friendly pin brad nailer, we'd suggest Everwin. As Everwin continues to claim new territory with their expanding lineup of collated fastening products, we can almost certainly expect to see continued growth in quality and performance.
2017 Taiwan Hardware Show Oct 11, 2017Exhibitions & Events

2017 Taiwan Hardware Show

EVERWIN returned to the Taiwan Hardware Show from October 11-13 of 2017.
EVERWIN® Wins a 2017 Pro Tool Innovation Award Sep 30, 2017Media Reports

EVERWIN® Wins a 2017 Pro Tool Innovation Award

This month wrapped up judging for the 5th annual Pro Tool Innovation Awards and EVERWIN received an award for the FCN90L.
EVERWIN® P650 Pin Nailer Review by Tool Box Buzz Jul 10, 2017Media Reports

EVERWIN® P650 Pin Nailer Review by Tool Box Buzz

We recently took a look at the Everwin Pneumatic Pin Nailer P650. Everwin nailers are fairly new to the market, and have been building their catalog of pneumatic nailers and staplers, since 2012.
2017 LIGNA Hannover May 12, 2017Exhibitions & Events

2017 LIGNA Hannover

Attention Hannover! EVERWIN will be exhibiting at LIGNA, the world's leading trade fair for woodworking and wood processing.
EVERWIN® SCN65 Coil Siding Nailer Review by Pro Tool Reviews Mar 22, 2017Media Reports

EVERWIN® SCN65 Coil Siding Nailer Review by Pro Tool Reviews

The Everwin Coil Siding Nailer is just one of the company’s deep product line. It is well-built with tough, durable materials with all the features you’d expect from a Pro siding nailer.
2016 MITEX Moscow Nov 09, 2016Exhibitions & Events

2016 MITEX Moscow

Watch out Moscow! EVERWIN will be exhibiting at MITEX, one of the biggest tools exhibitions in Russia.
2016 STAFDA (Atlanta, GA) Nov 06, 2016Exhibitions & Events

2016 STAFDA (Atlanta, GA)

EVERWIN will return to the Taiwan Hardware Show from November 6 - 8 of 2016.
Sep 08, 2016Media Reports

"NAME-BRAND QUALITY ON BUDGET - EVERWIN & SUREFIT MAKE A STATEMENT", An Article by Nail Gun Depot

Everwin Pneumatic may be relatively new to market, but they are far from inexperienced. In fact, the concept for Everwin was born in 2012, when several veteran tool engineers realized they could manufacture a pneumatic nailer, comparable in quality to products from Bostitch, Hitachi, MAX and others of the like, but without the vast overhead their competitors embrace.
23rd Manufacturing Technology World - Philippines Aug 05, 2016Exhibitions & Events

23rd Manufacturing Technology World - Philippines

EVERWIN will participate in the 23rd Manufacturing Technology World from August 18-20 of 2016 in Manila, Philippines.
2016 Taiwan Hardware Show Jul 26, 2016Exhibitions & Events

2016 Taiwan Hardware Show

EVERWIN will return to the Taiwan Hardware Show from October 12-14 of 2016.
2016 Koln Hardware Show Mar 16, 2016Exhibitions & Events

2016 Koln Hardware Show

Koln Hardware Show, the 50 year old exhibition attracts 2,670 exhibitors from 55 countries.
2015 Taiwan Hardware Show Oct 11, 2015Exhibitions & Events

2015 Taiwan Hardware Show

EVERWIN takes part in the 2015 Taiwan Hardware Show.
Product Update Announcement - PN100B Sep 18, 2012Product Press Releases

Product Update Announcement - PN100B

Through continuous research and testing, EVERWIN launches an update on its PN100 Coil Nailer.
23rd Manufacturing Technology World - Philippines Aug 05, 2011Product Press Releases

23rd Manufacturing Technology World - Philippines

EVERWIN will return to the STAFDA Convention from October 28 - 30 of 2018 in Phoenix, Arizona.